PDA

View Full Version : I got some new parts

93fakesnake
10-02-2008, 08:01 PM
I first want to thank Bones for riding with me last night to sparkle city to pick up my new parts for my GT. I will be switching over my front brakes for some 03 cobra brakes, calipers, spindles etc. Hope I didnt get you in too much trouble Bones for being a little late. Sorry Kelly I'm going to take the brakes apart next week and start cleaning the 03 stuff up and see what I need to switch it over and look for some different wheels...
Notch93
10-02-2008, 08:07 PM
Congrats on getting the upgraded brake parts, it should stop a lot better with those brakes.:yes1: You getting Bones into trouble again KB?:lol1::lol1:

What are you going to do with the wheels that are on now?
93fakesnake
10-02-2008, 08:18 PM
Right now I'm going to keep them. I'm not sure if they will clear the 13 inch brakes up front. If they won't I will sell them. I want to go with a 17 inch wheel and have a extra set of 15's to go to the track with.
WolfStang90GT
10-02-2008, 08:21 PM
no biggie KB, i knew yall would be gone half the night..LMAO!! i was happy when my boy won america's got talent so you both got lucky.. LMAO!!
93fakesnake
10-02-2008, 08:22 PM
I'm glad I was lucky this time!!!!
WolfStang90GT
10-02-2008, 08:23 PM
I'm glad I was lucky this time!!!!

this time...lol.. what you gonna cross your fingers for on the next trip??
93fakesnake
10-02-2008, 08:27 PM
You never know!!!!!!!!!!!!
BDASPNY
10-02-2008, 08:29 PM
I first want to thank Bones for riding with me last night to sparkle city to pick up my new parts for my GT. I will be switching over my front brakes for some 03 cobra brakes, calipers, spindles etc. Hope I didnt get you in too much trouble Bones for being a little late. Sorry Kelly I'm going to take the brakes apart next week and start cleaning the 03 stuff up and see what I need to switch it over and look for some different wheels...



aren't you always getting someone in trouble?


in any case congrats on the new brake stuff. that is what is going on mine. it goes in the shop mon to get the entire 5 lug 4 disc brake setup. it should be awesome.
93fakesnake
10-02-2008, 08:30 PM
What are you going with for the rear. When you get it out let me know what all I need for the front
BDASPNY
10-02-2008, 08:37 PM
What are you going with for the rear. When you get it out let me know what all I need for the front



i got the calipers, dust shield, stainless hoses, 94 gt spindles including the hubs. for the front.

also upgrading to a cobra master cylinder, brake booster, frrp brake proportioning valve. got the kit from max motorsports to get rid of the stock valve. hawk ceramic pads front and rear.

on the rear i am using cobra calipers as well, 03/04 cobra 31 spline diff, moser 31 spline axles, stianless hoses, got the frrp kit they sell for the upgrade for reg gt's to cobra brakes.



i have rotors front and rear i need to sell from when i got the front calipers, they all have only 37k miles on them if ya wanna deal?
SVTSkip
10-02-2008, 09:41 PM
I'm gonna be the last 4 lug Fox on the planet I think... LOL ! Looking good ! :thumbsup1:
greypony89
10-02-2008, 09:45 PM
Congrats on the new parts. Now help Bones with his so next pony run he want have to keep pulling beside me to keep from rear ending me hehehe LOL Sorry man had to say it :taunt:
93fakesnake
10-02-2008, 09:51 PM
lol
NOTCHED
10-02-2008, 10:22 PM
I'm gonna be the last 4 lug Fox on the planet I think...

...nope, I'll be there wichya all the way! :)
SVTSkip
10-02-2008, 10:26 PM
...nope, I'll be there wichya all the way! :)


ROCK ON !!! :patriot:
Nova
10-02-2008, 10:43 PM
chrome pony r's please... or the new BBS wheels.
Notch93
10-02-2008, 11:38 PM
I'm gonna be the last 4 lug Fox on the planet I think... LOL !

Still 4 lug here also.:thumbsup1:
crumbie
10-03-2008, 07:59 AM
why spend money on brakes? they just make you go slower. :yes1:
greypony89
10-03-2008, 08:10 AM
...nope, I'll be there wichya all the way! :)

LOL Im with you guys so far !! Everytime I go to 5 lug mine something happens lol then I have to say well the ponies dont look that bad knowing I want them OFF!
nastynotchback1
10-03-2008, 12:29 PM
i think you have to run a small spacer and grind on the caliper to make them fit
BDASPNY
10-03-2008, 12:49 PM
i think you have to run a small spacer and grind on the caliper to make them fit

it all depends on which spindles you use. i got the 94/95 and cobra calipers not gt. i believe its the gt that needs grinding? so no grinding needed for me. kb check the other brake thread i posted some very indepth links that will show you the way....