Help needed on explorer intake setup

[SCREAMNINK 5.0]

I need to sum help on a explorer intake set up on my 306. So far i cant seem to figure out how im suppose to hook up my throttle cable setup on there. And the wireing harness is diffrent on a couple of plug in's. Vaccum set up is totally diffrent to. Anybody got knowledge of whats what?

[Notch93]

http://www.allfordmustangs.com/Detailed/614.shtml

What TB are you using?

[greypony89]

Hey man I told you let me know when your going over there and I will help you.

[SCREAMNINK 5.0]

Its a stock 1 for now untill i get a 75mm

[Notch93]

Its a stock 1 for now untill i get a 75mm

Stock mustang or explorer TB? I wouldn't go any bigger then a 65mm TB on that intake.

[SCREAMNINK 5.0]

Mustang tb . So a 65 mm is good enough, even with a built 306. Gt40 p heads. B cam

[SCREAMNINK 5.0]

Oh yeah and apparently the bolts off a stock intake dosnt work with this intake . The stock ones are like 2"s shorter and im only running a 1" spacer between intakes

[Notch93]

Mustang tb . So a 65 mm is good enough, even with a built 306. Gt40 p heads. B cam

The mustang TB should work without having to modify it. Yes the 65mm TB is plenty for your combo. Remember the opening on the explorer intake is 65mm, so anything larger would be a waste. And could actually hurt your performance.

[SCREAMNINK 5.0]

Kool deal bro thanks. Now if i can figure out whats up with the bolts and then how im gonna rig up my throttle cable on there.

[Notch93]

Running the 1" spacer, you will have to go to the hardware store and get two 7" long bolts.

[bonesgt]

Kool deal bro thanks. Now if i can figure out whats up with the bolts and then how im gonna rig up my throttle cable on there.

If you are running the EGR, you shouldn't have a problem with throttle cable location.

Here is what a Explorer intake looked liked on my 87...
http://www.badmustangsclub.com/gallery/files/1/1/DSCF1973.JPG

[SCREAMNINK 5.0]

Yea i was gonna go to asheville nut and bolt and get some . Thanks man.

[SCREAMNINK 5.0]

Did ur stock harness work with this intake? Did u have to delete or change any of it

[bonesgt]

Did ur stock harness work with this intake? Did u have to delete or change any of it

Stock harness, injectors and all fit just like on a stock 5.0 Intake. Only thing you will have to do, is re route the vacuum lines.:thumbsup1:

[SCREAMNINK 5.0]

The only vaccum lines i should need is the egr and for the fuel regulator right? Every thing else i can plug of on the manifold?

[bonesgt]

The only vaccum lines i should need is the egr and for the fuel regulator right? Every thing else i can plug of on the manifold?

I'll have to look tomorrow and double check, BUT I know you will need connections for the following: Fuel Press Reg (line all to itself!!)
PVC Valve
Vacuum Tree

[SCREAMNINK 5.0]

Thanks man