PDA

View Full Version : windsor SR's

Derek@amazon
09-11-2009, 02:48 PM
are they big enough for a 408 or do i need something more along the lines of an AFR225 or trick flow highports?
90hatch
09-11-2009, 02:56 PM
afr 225 are a big head even for a 408 unless your doing forced induction, had a guy that had 225 on a 408 and it ran okay it was a n/a car but he went to a 195 head and the car picked up half a sec in the 1/8th. if your going to go with a power adder then they will probably do okay. but you can never really tell until the car is done whats going to make it run the best
Notch93
09-11-2009, 04:18 PM
TFS High-Ports,:thumbsup1: just ask Scott Boda, our Sept. FOTM.:yes1:
jboren93
09-11-2009, 05:05 PM
is it gonna be a motor car or turbo/nitrous/sc and also is it gonna be a streetable car or a trailer queen??
Derek@amazon
09-11-2009, 09:37 PM
im pretty sure like 99% sure no matter what combo i go with 8.2 or 9.5 deck its gunna be a nitrous car. and streetable is kinda open to the driver... it wont see much highway if any but it will see driving around town.
Badass1993
09-11-2009, 10:07 PM
225's FTW or a victor jr......:yes1:
Derek@amazon
09-11-2009, 10:11 PM
225's FTW or a victor jr......:yes1:

edit... nevermind im getting my virctors and windsors crossed
90hatch
09-12-2009, 08:28 AM
do you already have your 351 block and heads?
Derek@amazon
09-12-2009, 09:04 AM
not yet.... not going to start on it till this winter

im taking care of the money part right now.
XSR
09-12-2009, 09:45 AM
It has alot on the total setup, and how the car is going to be used. When you get closer, and have decided which cu./in. you go with, let us know. Then I can give you better idea of which way to go. I fully ported a set of Jr's, fully ported super vic intake(2924), custom solid roller, in a street 393, and it ran 10.3's @ 133 NA. The car had more in it, and he eventually got it in the 9's, with alittle more compression/gear.
Derek@amazon
09-14-2009, 09:00 AM
It has alot on the total setup, and how the car is going to be used. When you get closer, and have decided which cu./in. you go with, let us know. Then I can give you better idea of which way to go. I fully ported a set of Jr's, fully ported super vic intake(2924), custom solid roller, in a street 393, and it ran 10.3's @ 133 NA. The car had more in it, and he eventually got it in the 9's, with alittle more compression/gear.

http://www.summitracing.com/parts/ESP-14125030/
thinking that kit cam im sure will be something custom