b 303

[5.0man]

got a used b 303 cam give to me is this ok to use

[nitrostangracin]

Very hard to tell from the pictures. I would consider using something other than one of the Alpahbet Cams. You get more out of them.

[5.0man]

well its free so im gonna put its in my car now and i plan on building either a 306 or 347s here in the near future just according to financial status at the time but the lobes and journals look to be ok on it dont see no wear at all, really looks new

[JB_90LX50]

just put one in mine just the other weekend. I like it so far seems to really kick in around 3000+, has a nice mean sound. I added a B-cam and a GT40 intake together.

I had a similar situation as you, I already had the GT40 intake just sitting around and got a good deal on a b-cam, so I went ahead and put it in.:thumbsup1::yes1:

I'm planning on a complete rebuild soon or another motor, just wanted to play around a little.

Good luck:thumbsup1:

Josh

[5.0man]

really man i got gt40p heads hope to add rr's soon but i now a guy with a gt40 intake im gonna try to get but yeah man bout the same situation i heard a stang with a ecam and turn down mac's it sounded like a fire breathing dragon and he told me the b cam sounded better so i cant wait but how lopey is the idle on yours? thanks by the way guys for the posts

[nitrostangracin]

Free is always good.

[5.0man]

so 1.7s would be ok

[stangster50]

really man i got gt40p heads hope to add rr's soon but i now a guy with a gt40 intake im gonna try to get but yeah man bout the same situation i heard a stang with a ecam and turn down mac's it sounded like a fire breathing dragon and he told me the b cam sounded better so i cant wait but how lopey is the idle on yours? thanks by the way guys for the posts

http://www.youtube.com/watch?v=nllpKzLP-QY

[JB_90LX50]

really man i got gt40p heads hope to add rr's soon but i now a guy with a gt40 intake im gonna try to get but yeah man bout the same situation i heard a stang with a ecam and turn down mac's it sounded like a fire breathing dragon and he told me the b cam sounded better so i cant wait but how lopey is the idle on yours? thanks by the way guys for the posts

It's pretty dang lopey:yes1: The b-cam sure sounds like you've got more than you actually do. I've stopped at a few gas stations to pick up some drinks and stuff and everytime I come out and someone hears the car you have to stand there and talk a little bit. (Same ole story told everytime, just a intake, a little cam, and exhaust:lol1::lol1:)

I've still got a little tuning to do though, I've got the timing right, but I'm still getting a little idle surge, gonna work on that next.

Josh

[5.0man]

i love the lope!! lol man you should get some vid clips

[JB_90LX50]

LOL yeah I should get some video clips:yes1::lol1:

1.7's would work (if you get the right ones, be careful, I've looked at several different kinds, if you get them make sure they will work before purchasing:yes1:) However, I'm gonna wait on roller rockers until I decide on what I want to do with the motor next, heads? complete rebuild? new motor? Havent decided yet.

You should really like it though, like I said before I like it pretty good.:yes1:
It will hold me over until I decide what I really want to do:yes1::lol1:

It was a fun weekend project putting all that stuff in.:yes1::thumbsup1:

good luck:yes1::thumbsup1:

Josh

[Mustang Leo]

Hey 5.0, I think Bizaro did a sticky on this with sound clips to help us choose. From what I am told by Thumper Performance out of Miami Fl, a b cam with the gt40p heads shold really do a good job. A good set of springs for those heads wold be a good investment when you do the new 1.7 roller rockers. BTW I have a set for sale brand new from thumper's shop......

leo

[nitrostangracin]

Anyhting more than a 1.6 should be checked for Piston to Valve Clearance for safety. It should clear but have it checked before starting the motor. Better safe than sorry.

[5.0man]

thanks man ill get a vid on here

[Notch93]

Anyhting more than a 1.6 should be checked for Piston to Valve Clearance for safety. It should clear but have it checked before starting the motor. Better safe than sorry.

B cam with 1.7's, equals a TFS stage 1 basically. It will clear with no problems, unless the heads have been milled a lot.

[5.0man]

none that i know of man

[Badass1993]

Just stuck a B303 in my 95,You'll love it,especially with somewhat stock set of heads.....I have a video clip somewhere

[5.0man]

really man if you can find it sure would love to see it man

[JB_90LX50]

really man if you can find it sure would love to see it man

The youtube video that someone posted earlier with the black 5.0, thats about how mine sounds:yes1::yes1::thumbsup1:

I just want a louder exhaust now, the flowmaster 40 series just isn't doing it for me any more:lol1::lol1::lol1:

flowmaster super 44's......maybe some flowmaster single chambers.....maybe magnaflows........:ponder:

[5.0man]

my opinion i like the magnaflows better than the flowmaster just never heard the super 44's but def what id go with if flows

[midnight stang]

The bcam and 1.7s are like peanut butter and jelly, they should never be separated IMO. I change and always end up going back in my street car.

[5.0man]

thats the setup im going for

[Badass1993]

really man if you can find it sure would love to see it man

OK here we go.....The Black 92 Is my brothers car,It sports a B303 Gt-40 heads and Gt-40 intake,the origional ones! 1.7 cobra RR,and Flowmaster exaust..... The Teal/Grey 93 Is mine,at that time it had a anderson B-41 .544in .563ex lift cam.....Holly intake,AFR heads,and 3" Mac Dumps.....

http://videos.streetfire.net/video/Exaust-test_704238.htm


Give it a few minutes,its still optimizing

[Badass1993]

OK here we go.....The Black 92 Is my brothers car,It sports a B303 Gt-40 heads and Gt-40 intake,the origional ones! 1.7 cobra RR,and Flowmaster exaust..... The Teal/Grey 93 Is mine,at that time it had a anderson B-41 .544in .563ex lift cam.....Holly intake,AFR heads,and 3" Mac Dumps.....

http://videos.streetfire.net/video/Exaust-test_704238.htm


Give it a few minutes,its still optimizing

Sorry about the crappy video,it dont do it justice

[Mustang Leo]

still like the sound of the b cam over the other one.:thumbsup1:

[5.0man]

yeah no offense but i like the lope of the b cam but i love the dumps on yours still wouldnt mind the b41 either both great sounding foxes my plans are the b cam gt40p heads possibly gt40 intake 1.7's and the mac dumps

[Badass1993]

yeah no offense but i like the lope of the b cam but i love the dumps on yours still wouldnt mind the b41 either both great sounding foxes my plans are the b cam gt40p heads possibly gt40 intake 1.7's and the mac dumps

both cars have dumps,one just with flows,and the other with Macs.....I know you cant tell in the video,but both cars hit compairably similiar.....I like the sound of the B better,but the B-41 isnt there for the sound;)

[5.0man]

yeah i could tell the b41 had more lift they did sound similar but still different at the same time do you still have b41 in your fox

[Badass1993]

yeah i could tell the b41 had more lift they did sound similar but still different at the same time do you still have b41 in your fox

yeah,gonna hang onto it...considred putting it in the stroker....should work wonders with a shot of gas

[5.0man]

i hear that im probally gonna throw in that b 303 and set of lifts because late ron im wanting to build a stroker and ill go with a t/f or comp cam something with some BIG lift possibly a anderson

[Badass1993]

Id throw it in for the time being,and with a stroker,you are gonna need more lift and duration to fill the cylinders up

[5.0man]

haha we think alike