1/2 inch fuel lines

[1bad88vert]

I was just wondering if anybody has ever changed their fuel lines to 1/2 inch and upgraded their fuel rails . If so what did u do and what did you use. I would like to upgrade the lines and the rails . If anybody can please help me in the right direction.:pray:

[Bizarro]

first off.... before you go to far, what all is done to the motor NOW?

reason i ask is the stock lines an rails will hold alot more than you might think!
an personally id rather spend more on GO FAST goodies first than upgraded fuel system when really you didnt need it yet. :thumbsup1:

[1bad88vert]

first off.... before you go to far, what all is done to the motor .

reason i ask is the stock lines an rails will hold alot more than you might think!
an personally id rather spend more on GO FAST goodies first than upgraded fuel system when really you didnt need it yet. :thumbsup1:


Well my biggest reason for the upgrade is i think that i have a blockedge somewhere . I wish i knew somebody who had a stock fuel rail i could barrow just to see if it is in the rail. I dont know if i told you or not butwhen i built this car i swaped the motor out and put this one in . Well it ran lean as hell . I have gone through everything and the fuel lines and rail are the last thing i have not messed with .

[ldycoupe94]

Well my biggest reason for the upgrade is i think that i have a blockedge somewhere . I wish i knew somebody who had a stock fuel rail i could barrow just to see if it is in the rail. I dont know if i told you or not butwhen i built this car i swaped the motor out and put this one in . Well it ran lean as hell . I have gone through everything and the fuel lines and rail are the last thing i have not messed with .

well, ive got a few sets of stock rails that your more than welcome to try out... ive got ALL the hard lines an a few regulators.
let me know an i'll bring them to the QS&L if your going sunday. :thumbsup1:....


OH an by the way this is Shawn!..... i guess im in drag right now...LMAO

[Bizarro]

:imwithstupid:

OK im back now! :lol1:

[NC STANG GUY]

Yeah the stock chassis lines can flow enough for quite a bit of power. I have Vortech rails but stock chassis lines. (GSS340 intank,GSL392 inline pump,60lb injectors) and plenty of fuel up around 580 rwhp.

[1bad88vert]

Thanks everybody . I tried some stock rails out that bones had and it made no difference . I think I am going to try the computer next and se if that is what it is.