some more crap

[Quinn]

got the motor in and go to get in it and **** if the clutch ain't engaging so the tranny has to come out. if it ain't one thing it's another:angry::angry::angry::angry::angry::angry:: angry::angry::angry:

[93GTVert]

That sucks. :thumbsdown1:

[puttputt]

**** the bad luck. I hope you get it fixed soon.

[kdawgg11]

sorry dude I hope you get it fixed soon

[Silver91Hatch]

What do you mean by not engaging?? Give us some more info and well get it straightened out.

[Quinn]

What do you mean by not engaging?? Give us some more info and well get it straightened out.

The black piece that sticks out of the tranny that the clutch cable goes to just moves back and forth and it has no pedal

[nastynotchback1]

The black piece that sticks out of the tranny that the clutch cable goes to just moves back and forth and it has no pedal


IS THE CABLE CONNECTED?

[Silver91Hatch]

Make sure the Quad under the dash isn't broken or the cable isn't broken. It might need a firewall adjuster if the cable isn't broken and it has a aftermarket quad.

[Bizarro]

Sounds like the cable came off the quad. Side!

[cammincoupe]

Sounds like the cable came off the quad. Side!
i agree:thumbsup1:

[Quinn]

it has a firewall adjuster and i adjusted everything until i got a pedal but it's still not engaging.

[cammincoupe]

it has a firewall adjuster and i adjusted everything until i got a pedal but it's still not engaging.isthe cable adjustable? if so tighten the fire wall adj all the way up then back it out 3/4 of a inch, make sure you take the slack out of the cable at the bottom after

[tommustangii]

if you put the clutch disc in backwards it will do just what your talking about

[Quinn]

if you put the clutch disc in backwards it will do just what your talking about

I'm 99.9% sure i put it on the right way but i may not have:angry::angry::sad1:

[cammincoupe]

I'm 99.9% sure i put it on the right way but i may not have:angry::angry::sad1:i imagine it would be noticable bc im sure u would hear metal on metal.

[Quinn]

i imagine it would be noticable bc im sure u would hear metal on metal.

let me explain it a little better, when i first noticed it the clutch cable was really loose, not even tight at all. I adjusted it and got it tight and now it's sorta hard but it's still not engaging. I press the clutch in like it's got a clutch but just not working right. I myself thought it was in the cable some where but is the cable suppose to be on the inside or outside of that black piece that sticks out of the tranny?

[cammincoupe]

let me explain it a little better, when i first noticed it the clutch cable was really loose, not even tight at all. I adjusted it and got it tight and now it's sorta hard but it's still not engaging. I press the clutch in like it's got a clutch but just not working right. I myself thought it was in the cable some where but is the cable suppose to be on the inside or outside of that black piece that sticks out of the tranny?
what black peice are you takling about the clutch fork that comes through the bellhousing?

[Quinn]

what black peice are you takling about the clutch fork that comes through the bellhousing?

yea that's it

[cammincoupe]

the cable should slid through on the side near the trans and then slide back over to the outside of the clutch fork (furthest point away from bell housing) run you fire wall adj all the way in, then take slack up at the clutch fork and back out the fire wall adj 3/4 of a inch or you can back the fire wall adj out 3/4 inch first i normaly do the fire wall adj first.

[Quinn]

did that and it's doing the same, tight pedal but the clutch ain't engaging

[cammincoupe]

did that and it's doing the same, tight pedal but the clutch ain't engaging
what kind of clutch is it ? did you change the throw out bearing?

[Quinn]

what kind of clutch is it ? did you change the throw out bearing?

didn't change the throw out bearing but it's suppose to be a stage 2 clutch but hasn't been in there about 3 months

[cammincoupe]

didn't change the throw out bearing but it's suppose to be a stage 2 clutch but hasn't been in there about 3 monthswhat brand? i had lost of issues out of my spec stage 2, if the throw out bearing moved or got cocked sideways on the retaining spring in there it would be giving you these issues as well.

[Quinn]

what brand? i had lost of issues out of my spec stage 2, if the throw out bearing moved or got cocked sideways on the retaining spring in there it would be giving you these issues as well.

that's what i'm thinking it is but i don't want to mess with it b/c i have no were to work on it but in my driveway and it's gravel and fireants every where. i don't know the brand. it was working great when i drove the car from the guys house and parked it

[cammincoupe]

that's what i'm thinking it is but i don't want to mess with it b/c i have no were to work on it but in my driveway and it's gravel and fireants every where. i don't know the brand. it was working great when i drove the car from the guys house and parked it
well if i were u i would get a big ass tarp and lay down on it and snatch the trans out and check the throw out bearing, if i wasnt so far away i would come help ya.

[Quinn]

well if i were u i would get a big ass tarp and lay down on it and snatch the trans out and check the throw out bearing, if i wasnt so far away i would come help ya.

my uncle is gonna take it out and put it back in for me:thumbsup1:

[cammincoupe]

my uncle is gonna take it out and put it back in for me:thumbsup1:thats cool let me know what is wrong im curious to know now.

[Quinn]

thats cool let me know what is wrong im curious to know now.

my uncle said somthing like he thinks the throw out bearing is behind the fork or somthing like that

[cammincoupe]

my uncle said somthing like he thinks the throw out bearing is behind the fork or somthing like thatkinda like what i said b4 thats about the only thing left it could really be:thumbsup1: