ex mods

[rustedchevelle]

Just picked. Up a set of pace setters shortys headers and a 70mm throttle body. Have a bone stock engine what kind of power can I expect? Going to put a e 303 xam in later thanxz

[drivin-fool]

I would say you won't see much at all. The 70mm TB is useless on a stock intake, and the E-303 runs out of steam around 5800 rpm's so while it will hit pretty decent it is not the best cam out there by any stretch, The headers will allow a bit more breathing, but if you still have the stock exhaust it will be a minimal gain power wise.

[rustedchevelle]

I have a h pipe with flowmasters all the way out the back what would be a good can and intake setup. I'm not even sure if my motor is a roller or not?

[drivin-fool]

I have a h pipe with flowmasters all the way out the back what would be a good can and intake setup. I'm not even sure if my motor is a roller or not?

It really depends on what your future goals are. Do ya want a racecar or a daily driver or a respectable street car? Heads, cam and intake combo's can be had from Trick Flow for about $2700.00 and that would put you real close to 300 HP. Again it's all about your plans and your budget.