Traction lift bars

[silverfox]

I was wondering if anyone was useing a traction lift bar and if were what kind.I am running a 26/10/15 mt drag slick and it is spinning bad when i hit second gear.c4 tran. :runaway:

[Stable]

What is your Pinion angle? and rest of your setup(uppers?)?

[silverfox]

stock set up lower and upper control arms 3.73 gears 2400 stall 359w I am wanting to change upper and lower control arms but i was wondering what to run.this is a track car only and i know i need to lower the rear of the car and the car is really light it is gutted.stock pinion angle.

[nastynotchback1]

stock set up lower and upper control arms 3.73 gears 2400 stall 359w i am wanting to change upper and lower control arms but i was wondering what to run.this is a track car only and i know i need to lower the rear of the car and the car is really light it is gutted.stock pinion angle.


you need a good set of adjustable uppers and lowers with spherical bushings.also a good set of drag struts and shocks with the right springs.i would also install ans anti-roll bar.


Pm me if you would like and i can set you up.thanks trai

[Stable]

Give me a call and I will help you out with what you are trying to do...I am just down the road in the Greenville area. I have spent sometime up in that area...I used to do contract work for the ZF plant in Newton.

303-5897