Belt length

[tripps88]

Does anyone know off the top of your head's what length belt would work on my combo it is as follows:

alt, wp, p/s, crank pulley, stock style tensioner.

I have run a 70.5 and it looks like it is pulling the alt and p/s pump together, When I installed it there was some slack for the tensioner. Could just be me. I am going to check the pulley on the p/s pump this weekend and see if it is seated all the way up.

Thanks,
T

[bonesgt]

Where is your P/S located now? You can take a rope or string and run it around the pulleies and mark it, take it to a parts stores

[tripps88]

The P/S is were the air comp was I think I am going to have to do that I got a 71 1/8 to see if it would work idk.

[bonesgt]

Here you go man, sorry it took me so long to find it.
See which picture matches your set up...
http://www.cjponyparts.com/Pictures/Tech_50belts.gif

[tripps88]

You da man!!!!!

I had it set up like the top one on the right with a 70.5" I think I will try routing it like the pic for the 73" and use that length belt

Thanks man!!

[tiptopss]

try a 74.5 inch belt, it should work, id did for mine

[tripps88]

Which way did you route it like the 73" I do not have air or smog and my p/s was relocated to where the air comp was with the FRPP kit.

Thanks
T