Broken Door Handles

[clonegt93]

So going to my Girlfriends because its her birthday I stopped to get gas and my friggin door handle broke. My passenger one was already broken from before I got it. I talked to Micheal from here and the forum and with the help of pliers and a coat hanger got my door open.

Now the only problem is putting new handles on.

[badluckpony]

that would work

[bonesgt]

That should do the trick. But why not use one of our vendors.. www.palmettoponysales.com or www.foxmustangrestoration.com

[Notch93]

Is this the correct stuff I need to make my doors work again?
http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-22404K%20%20%20%20%201&comp=LRS
Thanks!

:yes1:

Stay with the black, they look some much better then the chrome ones, IMO.

Like Bones said, you can get them from one of our sponsor's also.:thumbsup1:

[PUN]

So going to my Girlfriends because its her birthday I stopped to get gas and my friggin door handle broke. My passenger one was already broken from before I got it. I talked to Micheal from here and the forum and with the help of pliers and a coat hanger got my door open.

Now the only problem is putting new handles on.
Is this the correct stuff I need to make my doors work again?
http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-22404K%20%20%20%20%201&comp=LRS
Thanks!

Those are the ones I have but I had a hard time finding a rivet gun with a port large enough to use those size rivets..they are huge.

[clonegt93]

That should do the trick. But why not use one of our vendors.. www.palmettoponysales.com or www.foxmustangrestoration.com

Well I was going off what Micheal told me. I cannot find door handles on either though, but send me the link if you can!

[Wayne's 88 GT]

Well I was going off what Micheal told me. I cannot find door handles on either though, but send me the link if you can!

here is the set from FMR
http://www.foxmustangrestoration.com/?p=vp&id=173

http://www.foxmustangrestoration.com/?p=vp&id=494

[clonegt93]

here is the set from FMR
http://www.foxmustangrestoration.com/?p=vp&id=173

http://www.foxmustangrestoration.com/?p=vp&id=494

hey thanks for the link.
I haven't ordered anything yet but i need to soon!

[clonegt93]

Those are the ones I have but I had a hard time finding a rivet gun with a port large enough to use those size rivets..they are huge.

My friend bought the same ones, who hopefully might help me put them on, has a guy with a gun down the road he used and thinks we can borrow.:thumbsup1:

[93fakesnake]

Try our club vendors first before you go somewhere else

[nastynotchback1]

the rivet gun for door handles is not cheap to buy.i bolt mine on after replacing them with no ill affects.check out the site sponsors for sure.both guys can help you out.

[Blacksheep]

I agree with shawn. Palmetto ( a vendor) has great door handles, im not sure of the price on them (he has told me, but i always forget) they are rivited in, not bolted. There metal i know he has black, but im not sure about any other color.