Ok guys can you help

[badluckpony]

I know nothing about matching parts and getting the best to go with what you have. KB is getting me a motor from a buddy of his.Has gt40 uppper,lower and heads.Said it should have 1.7 roller rockers.Im going with the 3550 trans and a 373 gear.Also picked up a nos wet kit goes up to 200.To get to the point im wanting to go with a bigger cam.What should i do or go with?

[Badass1993]

with the Gt-40 stuff I dont reccomend much bigger than a B-303...Oh wait you said something about spraying the car......TFS stage 1 hands down :thumbsup1: expect to flycut the pistons with a 1.7rr

[badluckpony]

kb said i could go with the f303 or just call comp cams?But thanks man

[Badass1993]

kb said i could go with the f303 or just call comp cams?But thanks man

a F is okay....I think you might gain more from a crane or TFS cam though

[badluckpony]

ok thanks

[Runningpony98]

cut down on your rocker ratio and you will have more choices. i have an e-cam in my 95 with 1.6 rockers. try if you can to stay away from motorsports cams. all they do is sound good.

[badluckpony]

then i will have to find some 1.6

[Runningpony98]

i put down 326 at the wheels and still have the factory stamped steel rocker arms on mine

[SVTSkip]

of all people skip you should know better.XSR is a sponsor here that does great with custom cams and head work

[badluckpony]

whats a ball park price with him

[SVTSkip]

I'd guess around $350 or so. About what you'd pay for something from AFM or one of Comps nicer grinds...

[Silver91Hatch]

I know custome cams are on the rise, but I think a TFS stage 1 cam is a good all around cam or a Lunati 51014. If you are going to change your combo around then a stock cam will still work but just not as good. I think a TFS will work fine.

[badluckpony]

thats 2 or 3 with the tfs stage one so thats what i'll go with or that came chuck has for sale

[Notch93]

I know custome cams are on the rise, but I think a TFS stage 1 cam is a good all around cam or a Lunati 51014. If you are going to change your combo around then a stock cam will still work but just not as good. I think a TFS will work fine.

X2 :yes1:

Either of the above mentioned cams will work. I have seen both cams ran in the same setup with 1.7's also. Wouldn't hurt to check PV Clarence, but I bet you it will be fine. In the old days, we would run the GT40's & 1.7's with the Wolverine 1087, which is a bigger cam then the ones above, without problems.

[badluckpony]

:lol1::taunt:thanks guys ya'll are great friends. Dont care what bones says about ya lol j/k

[Notch93]

i'll go with that cam chuck has for sale

X2:yes1: I think it's better then a Stage 1, and it will love the nitrous.:thumbsup1:

Thats the same cam that is going in my 306.:D

And if you need a set of 1.6's, Art has a set for cheap for sale.

http://www.southeasternfoxbodies.com/forums/showpost.php?p=17661&postcount=1

[nastynotchback1]

the 51014 that chuck has was in my old motor.it worked great with the gas.i ran a 6.90 with a stock bottom end full street car with 150 shot.went 7.70 on motor