Was having a good day wtf.

[badluckpony]

Well was having a great day untill this drove on the way home from greer .Put my cobra r's on the rear of my car. Went home for a sec.Then went to my friends house to play halo 3. Pull out of his yard start up the road then waammmmmmm i cant see ****. So idk what the hell is up if someone is pissed at me or what.
http://i215.photobucket.com/albums/cc226/calaluvshim/huh.jpg
http://i215.photobucket.com/albums/cc226/calaluvshim/pissed.jpg
How do i fix this?? and if i dont the car is for sale 4,500

[capriracer86]

**** dude thats sux... man u have been havin a time with that car!!!

[badluckpony]

tell me about it just got it where it would run great man. has new clutch,oil pan gasket, water pump gasket,front brakes,clutch cable,rear shocks,u joints, cleaned intake,paint. Then this.

[Badass1993]

Dude??? How did that happen??? dosent your car have hood pins.....Ask Bones,this has happned to him a time or two,he might no a guy that can hook you up:yes1:

[badluckpony]

SOMEONE pulled the clips out of the hood when i was in my friends house

[Quinn]

that's messed up

[badluckpony]

how do i fix it tho

[89LXCOUPE]

Its not easy to fix. To fix it right you have to cut that panel out.

[Heiny4U2Tame]

Dang Joel...that sucks!! Sorry to hear it :sad1:

[badluckpony]

i no have to pull the dang window out too

[Nova]

its a ***** to fix.

[badluckpony]

my buddy is a paint and body man. So going to get it fix whenever i get the money getting the car repainted to.I just love my luck.

[Quinn]

me and taylor play halo3 22 hours a day, do yall play online?

[badluckpony]

yea xXxBRxXxStAnG

[redtang93]

so how bad did it mess the hood up. i can't believe it didn't bust your window out. man that sucks.

[vcr12564]

Sorry to hear that Joel.

[badluckpony]

it didnt do **** to the hood but bust the **** paint off.Wished it would have tore the hood all to hell.Cuz i have another hood thanks to bones. But it got the hood hinges the black cowl grille thing. So i need all them parts if anyone has them thanks.

[Notch93]

SOMEONE pulled the clips out of the hood when i was in my friends house

Thats fucked up.:yes1::bat::bat:

[Blacksheep]

That happend to my buddy also. That sucks sry to hear about that man. U should be able to pull that out and fix, its not that bad.

[badluckpony]

would love to...:yes1::angry: but dont no who did it.But people have big:yell: so i may end up in :jail:

[badluckpony]

its pushed it down on top of the wiper arms and ripped the metal up a little

[Notch93]

Thats why if I ever put a glass hood on I will be using these pins.:yes1:

http://static.summitracing.com/global/images/prod/large/fms-m-16700-a_w.jpg


It sucks it happened, but you should have double checked them (I sure would if I had hood pins) before you drive away from any place.

[93fakesnake]

To fix it right you will have to have it cut out and a new panel installed. It's not that bad if you have the stuff to fix it. I'll look around the shop and see if I have a black cowl cover but I dont think I do. I got a guy local that may be able to fix it, I'll stop by and ask him tomorrow

[badluckpony]

how much are those and where can i get them

[Quinn]

these are what you need, you know they are locked and nobody can steal your hood

http://www.southeasternfoxbodies.com/forums/picture.php?albumid=135&pictureid=6940

[Notch93]

these are what you need, you know they are locked and nobody can steal your hood

http://www.southeasternfoxbodies.com/forums/picture.php?albumid=135&pictureid=6940

Those work also,:yes1: just never liked the look of them.

[Notch93]

how much are those and where can i get them

http://store.summitracing.com/partdetail.asp?autofilter=1&part=FMS%2DM%2D16700%2DA&N=700+0&autoview=sku

[Quinn]

Those work also,:yes1: just never liked the look of them.

My buddy had them on his old car and i liked the way they looked b/c you didn't have this big pin or the little rods sticking up

[badluckpony]

where can i get them and how much

[Quinn]

you got your cheap ones here

http://cgi.ebay.com/ebaymotors/4021-FLUSH-LOCKING-HOOD-PIN-KIT-s3_W0QQitemZ190107028771QQcmdZViewItem

and your more reliable ones

http://store.summitracing.com/partdetail.asp?part=mrg-1472

[Silver91Hatch]

I found out my car had about 6" of Bondo in that area when I bought it!! I removed the cowl screen, put a Porta-Power and a 4x4 in there with a spreader head and slowly worked it out, got it to 1/8 of filler and wiped it and painted it(of course bodywork in the middle) but I never cut into my cowl, just took it slow and did it right. I have a good fitting glass hood with no pins, IMO pins are ugly, ANY pins are ugly. I would rather get a GOOD glass hood with support and make it fit right.

[Runningpony98]

let me know if you need any parts man

[badluckpony]

i need the stuff to put the stock hood and all that good stuff back on with out pins,

[86gtstang]

I've got everything you need to fix it

[BadMoFo]

ya I try to look at my hood before I go anywhere to check the pins cause I have heard of this before. I keep a spare set in my glove box just in case some jerk steals mine. thinking about getting the locking ones though since mine are all rusty now. but who knows.

[DSTRBD]

Sorry to hear that Bro,

[Runningpony98]

let me know when you wanna get that stuff

[cobrapony50]

Man hate that for ya. You should put the locking pins back in when you get it fixed. And I agree someone would tote a beating for awhile:bat:.