Getting the '92 Dyno'd at Fastlane

[5.SLO]

Well, I'm getting the '92 dyno'd at Fastlane tomorrow to get a baseline before I start my little engine crap seen in this thread:

http://www.southeasternfoxbodies.com/forums/showthread.php?t=19799

Currently the car has the following mods:

- Mac Fenderwell Cold Air Intake
- BBK X-Pipe
- 2 Chamber Flows
- 3.73 Gear
- Aluminum Driveshaft
- Aftermarket Throttlebody... unknown brand or size...

On big and littles with 275 M/T Radials and a stock suspension it ran a 8.647 @ 79.45mph with a 1.798 60 ft at Farmington Dragway at the SEFB Track Day...

Sooooo what does everyone think it'll put to the ground tomorrow? :lol1:

[largedrag]

212hp

[Craig]

135 to the tire:lol1: good luck man

[NC STANG GUY]

Well, I'm getting the '92 dyno'd at Fastlane tomorrow to get a baseline before I start my little engine crap seen in this thread:

http://www.southeasternfoxbodies.com/forums/showthread.php?t=19799

Currently the car has the following mods:

- Mac Fenderwell Cold Air Intake
- BBK X-Pipe
- 2 Chamber Flows
- 3.73 Gear
- Aluminum Driveshaft

On big and littles with 275 M/T Radials and a stock suspension it ran a 8.647 @ 79.45mph with a 1.798 60 ft at Farmington Dragway at the SEFB Track Day...

Sooooo what does everyone think it'll put to the ground tomorrow? :lol1:

Don't forget about the massive timing bump! :lol1:

206.43 rwhp

[mrw1990]

I say It'll probably BLOW!!!!!

[5.SLO]

Don't forget about the massive timing bump! :lol1:

206.43 rwhp

hahaha, I don't even remember what it was bumped to!:lol1: I just know that it was at 0 degrees before bumping it!


I say It'll probably BLOW!!!!!

I hope that joke pile of yours burns to the ground tonight...

[B250Xrider]

I say they all sling, the coupe and the GT

[mrw1990]

Fill the love, and you know if something happens I'm probably gonna fix it. And my fake ass stock **** will walk your wackass 2 tone

[mrw1990]

B get a big truck

[B250Xrider]

Im just looking to add a 3rd vehicle to my fleet similar to your 3rd (daily driver) Michael. Thats ALL im trying to do...

[Silver91Hatch]

Don't forget the unknown throttle body...

[5.SLO]

Don't forget the unknown throttle body...

hahaha FIXED!

[Quinn]

93

[dkcardwell]

220 rwhp

[cammincoupe]

196.78 hp and 221 foot pounds

[nastynotchback1]

225

[MustangCRZY302]

210hp/250tq

[mymastifftucker]

203 hp/ 235 tq


and on your engine parts thread, dont forget to have plenty of ice cold beer. Its a must on any build, especially if you have buddies coming to help.

[1992vert]

Are you running the bottle?

If so, NOS or Jack Daniels??

If NOS, what pill...75 shot or Percocet?? :lol1:

(I feel like Ken Herring!)

[5.SLO]

Well I'm back!

1st pull: 222.2 hp and 283.1 ft/lbs
2nd pull: 222.4 hp and 284.2 ft/lbs
3rd pull: 225.3 hp and 279.3 ft/lbs

Not too shabby for a pretty much stock motor with 127k on it! :yes1:

[93calypsocoupe]

awesome guys there took my car to get tuned there

[NC STANG GUY]

Well I'm back!

1st pull: 222.2 hp and 283.1 ft/lbs
2nd pull: 222.4 hp and 284.2 ft/lbs
3rd pull: 225.3 hp and 279.3 ft/lbs

Not too shabby for a pretty much stock motor with 127k on it! :yes1:

Very good numbers for a stocker. :yes1:

[5.SLO]

Very good numbers for a stocker. :yes1:

Yeah, I'm really happy with the #'s :yes1:

[Silver91Hatch]

Its got the Noxic on it!!!! Over 200 RWHP, fuggin race car!

[NC STANG GUY]

Its got the Noxic on it!!!! Over 200 RWHP, fuggin race car!

Actually the secret fuel is four loko. What I heard anyways...

[Silver91Hatch]

Actually the secret fuel is four loko. What I heard anyways...

http://www.youtube.com/watch?v=V89xMLC3Vkc

[1992vert]

Well I'm back!

1st pull: 222.2 hp and 283.1 ft/lbs
2nd pull: 222.4 hp and 284.2 ft/lbs
3rd pull: 225.3 hp and 279.3 ft/lbs

Not too shabby for a pretty much stock motor with 127k on it! :yes1:

Not bad D...not bad at all!! :thumbsup1:

[5.SLO]

Stop giving away my the secret to muh motah powahz!!!!! :angry:

[tc_white]

good numbers. congrats.

[5.SLO]

Oh, and here's vids of the pulls... I honestly figured it'd give off a little puff of smoke when he let off, but it didnt put out any at all! :thumbsup1:

http://www.youtube.com/watch?v=LHdGnnr2n5Q
http://www.youtube.com/watch?v=0BpEYmSZR0Y

[Poptart]

Nice numbers, the car looks and sounds good in the video just needs some tint on them windows :thumbsup1:. Caleb knows his stuff he tuned and built my brothers 383 turbo notch.

[89stang1]

good numbers!......some real sick rides come out of Fastlane:thumbsup1:

[5.SLO]

Just got back from having it dyno'd post mods...

1st Pull was done with car at full temp as soon as i got there...

1st Pull: 248 rwhp and 287 rwtq
2nd Pull: 254.8 rwhp and 298.7 rwtq
3rd Pull: 255.7 rwhp and 296.1 rwtq

So at the crank it's right at 300hp... Not too shabby for stock ported junk. I still have the stock manifolds and the stock MAF haha. Those two things are really holding back some hp!

Vid: http://www.youtube.com/watch?v=fVEZt7s6L88

[NC STANG GUY]

Good solid 30 rwhp/almost 20 rwtq gain. I'd say that's alright there.

[4techFox89]

Nice man! Sounds and looks real good too! I had my first Mustang tuned by Fastlane. Definately some good guys up there.

[Silver91Hatch]

I don't believe you put a cam in your car. I bet you took the stocker out and ground a couple lobes off.

[5.SLO]

I don't believe you put a cam in your car. I bet you took the stocker out and ground a couple lobes off.

duuuuuuuuuh :yes1:

[Notch93]

Good solid 30 rwhp/almost 20 rwtq gain. I'd say that's alright there.

X2,:yes1: and it sounds better now.:thumbsup1:

[5.SLO]

Dyno Graph comparison...

http://i56.tinypic.com/1e0thk.jpg

[Silver91Hatch]

Great upgrades. Lost nearly nothing down low and gained nearly 40 ft-lbs of torque at 4300.

[1992vert]

That torque curve is looking like Brittany's bottom...fat!

Nice work Dylan!!!

[89stang1]

real nice torque curve!!! comes up fast and stays up there nice great for low to mid tire shredding power......real good for street fun!!!......on my dyno print my torque curve is very similiar!

[COUNTRY BOY]

That's good:) i'm just wondering why da torque went down when da horsepower went up? Can anyone explain?

[Silver91Hatch]

That's good:) i'm just wondering why da torque went down when da horsepower went up? Can anyone explain?

Both went up....

[89stang1]

That's good:) i'm just wondering why da torque went down when da horsepower went up? Can anyone explain?

torque curve never stays up as long as the HP curve

[J.Elliott]

Cool deal. Glad to see those heads worked good.