chatter in top end

[fiveptohhh]

ok so about 3 weeks ago i rebuilt the top end of my motor. I have driven it to and from work (about 2-3 miles 1way)and it has ran great. Sat. i drove it in the toy run and back home after the party i put around 100 mi. on the motor, now it has a chatter in the top end. when i rebuilt it i set the rocker arms like the manual said but it sounds like they are not adjusted right (i reused the lifters so they were full). how do i adjust the rockers. Also before I did the rebuild i could run it up to around 6500rpm with no problem now its sounds like its gonna blow at 4500 to 5000.

[fiveptohhh]

Also i have to drive to charleston and back this week so i need to fix it ASAP.

[bonesgt]

What type of rockers and mounts?? stud or pedestals?

[fiveptohhh]

studs and crane 1.6 roller rockers

[bonesgt]

Sounds like you just need to re adjust them. I know we had to adjust Kelly's quite a few times, before they got settled in good.:thumbsup1:

[Notch93]

how do i adjust the rockers.

http://mustangpartstech.com/AdjustingRollerRockers.html

[fiveptohhh]

thanks for the link . im gonna pull it down in the morning and see if i can get it fixed.

[bonesgt]

thanks for the link . im gonna pull it down in the morning and see if i can get it fixed.

Hope that works for ya bro

[fiveptohhh]

i hope so thanks for the help . im getting the trans. rebuilt this weekend, my dad is gonna do it for me and get the parts and in return im giving him my bike(which also has no 1st or second gear)

[Notch93]

thanks for the link . im gonna pull it down in the morning and see if i can get it fixed.

:thumbsup1: Good luck with it.:yes1:

[SVTSkip]

Sounds like an adjustment issue. Hopefully you'll be good to go in no time !