ls1 coils on a SBF

[88mouse]

Anybody ever done this set up. What all is needed

[stangster50]

im assuming you are using an aftermarket ems? like megasquirt?

[88mouse]

im assuming you are using an aftermarket ems? like megasquirt?

Thats what Im trying to figure out. I have been reading about alot of people doing this setup. But most have been running FI. Mine is carbed.

Im thinking about using the msd 6010 box. It is setup for running an carbed ls motor. But im not sure if I will be able to change the firing order around getting the cam and crank sensor hooked up.

[boostedcoupe]

I think that box is only for LS based motors. I cant really see why you would spend all that $ to put ls coils on unless you are using something like a mega squirt or a big stuff 3 system.

[88mouse]

I think that box is only for LS based motors. I cant really see why you would spend all that $ to put ls coils on unless you are using something like a mega squirt or a big stuff 3 system.

I can get the coils from a junkyard for $100.

And get the 6010 box from a parts dealer up the road with all the wiring for around $280

Im just not sure on how to setup the cam and crank sensor.

[stangster50]

i wouldnt try. i dont think it would work unless you could physically go in the program and make it work..

[Silver91Hatch]

If the firing order is that much different then just rewire move the wires to coils or repin the harness to make them fire in the correct order.