View Full Version : Vortech complete
foxmach
05-15-2010, 08:21 AM
http://i875.photobucket.com/albums/ab312/dmsibelius/DSC00745.jpghttp://i875.photobucket.com/albums/ab312/dmsibelius/DSC00744.jpghttp://i875.photobucket.com/albums/ab312/dmsibelius/DSC00743.jpg
bonesgt
05-15-2010, 08:28 AM
Very nice and clean install!!:thumbsup1:
1992vert
05-15-2010, 08:41 AM
Very nice and clean install!!:thumbsup1:
x2!
Wayne's 88 GT
05-15-2010, 08:43 AM
:drool: Very nice.................maybe one day..........:thumbsup1:
foxmach
05-15-2010, 12:07 PM
thanks all..I had fun doing it but glad it is complete so I can drive it some. I still have to hook up the fuel press and air fuel gauges...
Notch93
05-15-2010, 12:09 PM
:drool: Very nice.................maybe one day..........:thumbsup1:
X2 :yes1:
stang banger
05-15-2010, 12:19 PM
looks **** good:thumbsup1: how much boost?
BadMoFo
05-15-2010, 05:20 PM
nice and clean. let us know some numbers when you can
Craig
05-15-2010, 05:23 PM
:drool: Very nice.................maybe one day..........:thumbsup1:
X2 :yes1:
X3 vrey nice...
mustb50
05-15-2010, 09:46 PM
:yes1::drool::drool:so nice!!!!!
NC STANG GUY
05-16-2010, 03:05 PM
Nice clean install :thumbsup1:
4bangstang
05-16-2010, 06:00 PM
Very nice and clean! I think I just jizzed my pants lol!
foxmach
05-16-2010, 08:28 PM
It is the lowest boost Vortech they sell I am new to the boost world. I learned a lot and got loads of info on here! I have only put my foot into it a little bit and seems to pull good. Time to sell it and find a new project!!!!
crumbie
05-16-2010, 09:13 PM
It is the lowest boost Vortech they sell I am new to the boost world. I learned a lot and got loads of info on here! I have only put my foot into it a little bit and seems to pull good. Time to sell it and find a new project!!!!
very very nice and clean install! just a heads up - believe you will need to re-route the vacuum line from tb to oil fill tube. i think the way it is now, you'll be pressurizing your crankcase.
foxmach
05-16-2010, 09:31 PM
Yea nc stang guy pm me with the same info. Don't know if I should just install a check valve. Thanks for that infovery very nice and clean install! just a heads up - believe you will need to re-route the vacuum line from tb to oil fill tube. i think the way it is now, you'll be pressurizing your crankcase.
crumbie
05-16-2010, 09:40 PM
Yea nc stang guy pm me with the same info. Don't know if I should just install a check valve. Thanks for that info
I think you have to move it to before the blower and a check valve to keep possible oil leaking back through. Or cap your pcv, the throttlebody, and oil fill and run a breather.
foxmach
05-16-2010, 10:21 PM
Ok now I am lost. I think you have to move it to before the blower and a check valve to keep possible oil leaking back through. Or cap your pcv, the throttlebody, and oil fill and run a breather.
NC STANG GUY
05-17-2010, 12:23 AM
Ok now I am lost.
Just saying to cap the nipple on the tb and the oil filler neck,then add a screw in breather in place of the oil fill cap.
What I've also found helps is to add a heavy duty one way check valve inline with the pcv valve in the lower intake at the rear.
PCV valve is suppose to be a one way check valve itself but I've found they often don't seat correctly under boost allowing the boost to get into the crankcase.
I use one of these in 3/8's size.
http://www.usplastic.com/catalog/item.aspx?itemid=36844&catid=489
foxmach
05-17-2010, 05:46 AM
Just saying to cap the nipple on the tb and the oil filler neck,then add a screw in breather in place of the oil fill cap.
What I've also found helps is to add a heavy duty one way check valve inline with the pcv valve in the lower intake at the rear.
PCV valve is suppose to be a one way check valve itself but I've found they often don't seat correctly under boost allowing the boost to get into the crankcase.
I use one of these in 3/8's size.
http://www.usplastic.com/catalog/item.aspx?itemid=36844&catid=489
Ok got ya now where can I find the fill neck breather?
foxmach
05-17-2010, 06:07 AM
Ok got ya now where can I find the fill neck breather?
Found it thanks again for all the help on here....:thumbsup1:
drivin-fool
05-17-2010, 08:25 AM
Glad that thing has come together so nice for ya Doug. It was a super clean job you did with the installation. When I do mine I am calling you up :lol1:
foxmach
05-17-2010, 10:23 AM
thanks bud sorry I missed your calls but I was deep in some poop...:sad1:
helmintoller
05-17-2010, 11:34 AM
:drool: gorgeous
indeed.
vBulletin® v3.7.5, Copyright ©2000-2012, Jelsoft Enterprises Ltd.