In need of

[SCREAMNINK 5.0]

Hey guys i need some upper control arm bushings for the rear of my car and all i can find are the lower's anybody got a set or know where i can find a set?

[93fakesnake]

What type of control arms do you have?

[SCREAMNINK 5.0]

Not really sure but i think there hotchkins or metco's. There red with no name on em

[93fakesnake]

Don't think they are Metco, I worked there a little and Metco's are stainless. Let me know if you can find out what you have and I will check to see if I have any.

[SCREAMNINK 5.0]

If u have a mustangs unlimited mag on page 218 under metco it has the ones that look like what i have. Part # 793082r

[93fakesnake]

If I get time I will go by there tomorrow and see what they can get them to me for.

[SCREAMNINK 5.0]

U dont have to do all that for me i can call them tomorrow to see if they even have replacement bushings for them or not. Just didnt wanna have to buy a whole set just for one arm .but i didnt know if pretty much any of them would work or if there all diffrent sizes according to the mfg. I apprieciate it very much man

[Notch93]

If you want to just get it on the road, then just put a stock replacement one in.

http://www.partsamerica.com/ProductDetail.aspx?MfrCode=MCQ&MfrPartNumber=FB695&PartType=2068&PTSet=A

They are all the same, most uppers are not sold with the axle bushings.

[SCREAMNINK 5.0]

What im needing is the bushing that bolts to the frame side of the left rear upper control arm

[93fakesnake]

Thats cool man. Just let me know if ya need me to go by and I will

[SCREAMNINK 5.0]

Thanks man i just dont want to put u out of ur way or cost u gas. I just cant find urathain bushings like whats in all the rest of them. Whoever put em in the car i got just didnt put one of them in. Hopefully they didnt drive the car with out it and put the rear end in a bind.

[93fakesnake]

Thats no problem. I was wanting to go by there anyway to say hello, that gives me a reason to do it

[SCREAMNINK 5.0]

Ok well if u put it that way lol yeah if u could just ask em for me id really apprieciate it man. U can either hit me up on here or my # is 828 777 7046. Thanks again

[Notch93]

KB should have you hooked up.:yes1: But remember you can always buy a complete Energy Suspension upper kit for $46.00.

http://www.partsamerica.com/ProductDetail.aspx?MfrCode=ENE&MfrPartNumber=43129G&PartType=2068&PTSet=A

[93fakesnake]

I will call you and let you know tomorrow

[SCREAMNINK 5.0]

Thanks guys

[SCREAMNINK 5.0]

Hey bro i called them today and the only thing they have is a whole set for like 84 bucks. So im gonna keep looking around . I may wind up having to do it but i hope i dont have to

[nitrostangracin]

Not worth replacing just the bushings for 84.00. I can sell you a new set of Heavy Duty Uppers that include new diff side bushings for 110.00 shipped.

[nitrostangracin]

Also need to remember that these companies all play games with there control arms. They all use a different size bushing so you have to call them back.

I have seen that before personally.

[SCREAMNINK 5.0]

Well theres no name on these . There after market upper and lowers and there red. Just dont know what kind. And all i need is bushings for 1 upper front side . The retard that put them in before i got the car apparently just didnt put it in. But the bolt is there for it. So go figure lol. Thats why i was venting the other night on here about stupid people.

[SCREAMNINK 5.0]

What kind do u have for that price

[nitrostangracin]

This is exactly wht they are. They are Steeda Heavy Duty Uppers. Not shown in the pic is the pair of Differential Side Bushings included inb the kit.

http://www.steeda.com/images/upper_rear_control_arm_650.jpg

[SCREAMNINK 5.0]

THIS IS WHAT I HAVE I THINK.
http://www.performancemustangparts.com/popuplargeimage.asp?strImage=727.jpg&strImageType=version&strPageTitle=Red PMP Rear Control Arm Package

[SCREAMNINK 5.0]

ITS THE ONES AT THE BOTTOM THERE RED


http://www.performancemustangparts.com/product.asp?cookiecheck=yes&numRecordPosition=6&P_ID=196&strPageHistory=&strKeywords=&SearchFor=&PT_ID=92

[nitrostangracin]

Link will not open for me. Go to the pic and right click on it. Once there, click on ther Properties link. Copy ther link and then come back here and post the pic with the images button. It is the 5th from the right on the bottom row above the text area. Once you open that, backspace to eliminate the http and then paste the link yo have.

[SCREAMNINK 5.0]

www.performancemustangparts.com/popuplargeimage.asp?strImage=727.jpg&strImageType=version&strPageTitle=Red PMP Rear Control Arm Package

[SCREAMNINK 5.0]

They have them advertised as red pmp rear controll arms